Tightening cassette driver

  • Discuss Tightening cassette driver in the General BMX Forum forum in area BMX-Forum Community; hey, my bmx driver is loose and i was wondering if anyone knew how to tighten a cassette driver?? thanks ...
I

ivanbmxer

Guest
Tightening cassette driver post #1
hey, my bmx driver is loose and i was wondering if anyone knew how to tighten a cassette driver??
thanks
 
Tyler Ciervo

Tyler Ciervo

New Member
Tightening cassette driver post #2
there are two bolts on either side of the driver on the axle. not the axle nuts!!! the ones closer to the driver. tighten those.
 
bmxad123

bmxad123

New Member
Tightening cassette driver post #3
not both of them just the one on the drive side. oh nd dont do it as tight as u can or u wont be able to peddal
 
I

ivanbmxer

Guest
Tightening cassette driver post #4
ive tryed that but wen i tighten it the driver is still loose it just tightens the hub but not the driver??:?
 
Tyler Ciervo

Tyler Ciervo

New Member
Tightening cassette driver post #5
not both of them just the one on the drive side. oh nd dont do it as tight as u can or u wont be able to peddal
i had to tighten both on my Demolition Anorexia.. :( haha.

and yea, not too tight or you deff wont be able to pedal.
 
Tyler Ciervo

Tyler Ciervo

New Member
Tightening cassette driver post #6
what hub is it? if its a stock crap hub then it may be time for some new stuff. i'd have to be looking at it to see the problem.
 
I

ivanbmxer

Guest
Tightening cassette driver post #7
ok well thanks anyway mine is a eastern stock hub
 
Creepozoid

Creepozoid

New Member
Tightening cassette driver post #8
ok well thanks anyway mine is a eastern stock hub
Some how I knew that :roll:

Seems like you need to first make sure the cones are tightened correctly, then tighten the others just more than finger tight.
 
H

Hermes

New Member
Tightening cassette driver post #9
^ yes do that^
 
eastpak

eastpak

New Member
Tightening cassette driver post #10
ive been having the same problem with my stock haro cassette hub :(
just give it a quick tighten but not oo much and you should be good to go
 

New Topics

Top