Sproket trouble.

  • Discuss Sproket trouble. in the BMX Bike Tech forum in area BMX-Forum Community; Ok so im getting new sproket and i need to get the first one off. its pressed on. i know i can use a hammer to put the new one on but the problem is... ...
JMcdonell

JMcdonell

New Member
Sproket trouble. post #1
Ok so im getting new sproket and i need to get the first one off. its pressed on. i know i can use a hammer to put the new one on but the problem is going to getting the old one off.
 
TimeIsMoney

TimeIsMoney

New Member
Sproket trouble. post #2
What do you mean by pressed on thats a new one on me are you sure it is
 
JMcdonell

JMcdonell

New Member
Sproket trouble. post #3
ill take a pic.
 
JMcdonell

JMcdonell

New Member
Sproket trouble. post #4
 
2WheelPride

2WheelPride

New Member
Sproket trouble. post #5
That's and unsealed crank set right, you'll have to take the spindle out of the bottom bracket and there should be a race/bolt that holds it in place on the backside that you remove to get the sprocket off.

Follow this guide
http://www.parktool.com/repair/readhowto.asp?id=92
 
JMcdonell

JMcdonell

New Member
Sproket trouble. post #6
that dosn't really make sence.
 
JMcdonell

JMcdonell

New Member
Sproket trouble. post #7
nvm figured it out + rep.
 
2WheelPride

2WheelPride

New Member
Sproket trouble. post #8
Was it unsealed? Or was my post completely useless, I forgot to mention that unsealed BBs work just the same as a one peace LOL.
 

New Topics

Top