removel of gyro

  • Discuss removel of gyro in the General BMX Forum forum in area BMX-Forum Community; Do I need to put any spacers in where the gyro plates were? or can I just take them off and run a straight cable to the brakes? thanks ...
O

orangebeast91489

New Member
removel of gyro post #1
Do I need to put any spacers in where the gyro plates were? or can I just take them off and run a straight cable to the brakes?

thanks
 
C

cav89

New Member
removel of gyro post #2
all depends on what you like.......it should already have spcers there so that a gyro could go there.......i have one below the stem and three spacers above it.
 
E

EPMD

New Member
removel of gyro post #3
i had to add a spacer when i removed my gyro spacer
 
T

Trimix

Guest
removel of gyro post #4
You can do it without spacers, as long as the top of the steer tube is below the top of the neck once it all tightens down. If not you have to add spacers. Remember, you are raising and lowering YOUR bars too....
 

New Topics

Top