rawing frame

  • Discuss rawing frame in the General BMX Forum forum in area BMX-Forum Community; hi ive already started rawing my frame with some paint stripper but i dont seem to have got very far im going to town tomorrow to get a good quality... ...
90psi

90psi

New Member
rawing frame post #1
hi ive already started rawing my frame with some paint stripper but i dont seem to have got very far
im going to town tomorrow to get a good quality stripper any segestions
and is there any tips while doin it( dont worry i am using gloves) is there a spesific way you have to put it on
 
Patrickk

Patrickk

New Member
rawing frame post #2
soak it up in a big container.

usually it should come off pretty quick with a thick rag.
 
T

t1jay

Guest
rawing frame post #3
with a pint brush and thick.
 
SnK

SnK

New Member
rawing frame post #4
I had the problem with mine, dousing it in nitromors and it still wasn't taking all the paint of just most of it. If you get the white paint underneath i used some fine sand paper to get rid of it. Took me about 3 hours of constantly soaking in nitromors leaving for 5 then sanding. I hear wire brushes are good aswell.
 
BmX NiNjA

BmX NiNjA

New Member
rawing frame post #5
yea wire brush is good...i got any old paint stripper then brushed it on with paint brush left bout 5mins then scraped it off with a wallpaper scraper then got thye left over bits of paint off with a wire brush
 
B

BMXchaduk

New Member
rawing frame post #6
jus soak its in paint stripper with a paint brush then when its bubbles and flaking use a wire brush to get the paint off or a brilo pad is good then finish of with wet and dry to get it shiny.
 
Jak94

Jak94

New Member
rawing frame post #7
nitromoz is good for rawin
 
T

tsi

Guest
rawing frame post #8
the paint stripper i bought said to wait for 20 minutes then wipe it off

i used a wire brush, and steel wool took like 5 hours but it came off.

use a paint brush and smear the stripper on the frame lots of it.
 
T

tsi

Guest
rawing frame post #9
the paint stripper i bought said to wait for 20 minutes then wipe it off

i used a wire brush, and steel wool took like 5 hours but it came off.

use a paint brush and smear the stripper on the frame lots of it.
 
T

tsi

Guest
rawing frame post #10
the paint stripper i bought said to wait for 20 minutes then wipe it off

i used a wire brush, and steel wool took like 5 hours but it came off.

use a paint brush and smear the stripper on the frame lots of it.
 
G

Gibbo.

Guest
rawing frame post #11
^^^^^^ AHAHAH WTF LOL you dont need to say it 3 times...
 

New Topics

Top