Pegs Problem

  • Discuss Pegs Problem in the BMX Bike Tech forum in area BMX-Forum Community; I need to remove the pegs so i'm just using my left side's pegs,i want to buy a tool to do it rather than going to bike shop to do it, but i donno... ...
  • Tags shop
D

dressed2kill

New Member
Pegs Problem post #1
I need to remove the pegs so i'm just using my left side's pegs,i want to buy a tool to do it rather than going to bike shop to do it, but i donno where i can buy it+what the tool's called/wat size ofs it etc is needed
 
old_school_goose

old_school_goose

New Member
Pegs Problem post #2
use a large socket extender and a socket big enough for your axle nuts, then untighten away. you can usually buy an extender in hardware stores or any tool shop. ask your neighbor for one if you dont have one.
 
T

Trimix

Guest
Pegs Problem post #3
Yea, probably 3/4" imperial, with a 6" extension, all on a 3/8" drive. That socket, extension, and rachet will do the job.
 
Bladerboi2k4

Bladerboi2k4

New Member
Pegs Problem post #4
arent there pegs when you just stick a screw driver in the 2 holes and untighten?
 
R

ridesavolume

New Member
Pegs Problem post #5
Bladerboi2k4 said:
arent there pegs when you just stick a screw driver in the 2 holes and untighten?
yeah they suck, to put it blunt.
 
renegade

renegade

New Member
Pegs Problem post #6
just get a socket extender
 

New Topics

Top