Need help choosing parts. Here's what I got.

  • Discuss Need help choosing parts. Here's what I got. in the BMX Bike Tech forum in area BMX-Forum Community; How does this look? The blanks are parts that I dont know what to get. The ones that have a part written in I probably won't change but feel free to... ...
L

leggomyeggow

New Member
Need help choosing parts. Here's what I got. post #1
How does this look? The blanks are parts that I dont know what to get. The ones that have a part written in I probably won't change but feel free to try and change my mind.

Frame: Fly Tierra
Fork:
Stem:
Headset: FSA Impact
Bars:
Grips: ODI Longnecks
Seat:
Seat Post
Seat Clamp: Fly Bikes
Cranks: Primo Hollowbites
Sprocket:
Pedals:
Chain:
Front Wheel: Oddyseey Hazard
Rear Wheel: Oddyseey Hazard
Bakes: Demolition U-Brake
Brake Lever: Odyssey Mono lever small
Brake Cable: Odyssey Linear Cable

+rep to the helpful
 
Last edited:
TimeIsMoney

TimeIsMoney

New Member
Need help choosing parts. Here's what I got. post #2
Chain: KMC Kool 710 (I've had no troubles with mine)
Seat Post: Fit Bikes DL seat post
Sprocket: Sprocky Balboa
Pedals: Oddysey Plastics

People's opinions may vary but thats what I would go for.
 
2WheelPride

2WheelPride

New Member
Need help choosing parts. Here's what I got. post #3
M

marks86

Guest
Need help choosing parts. Here's what I got. post #4
most of those parts are opoion but for a chain I would say the KMC superlite
 
L

leggomyeggow

New Member
Need help choosing parts. Here's what I got. post #5
how about stems and bars?
 
fitbmxer

fitbmxer

New Member
Need help choosing parts. Here's what I got. post #6
stem: s&m redneck xlt
bars: fit sky highs are real good
 
K

Kirbs

New Member
Need help choosing parts. Here's what I got. post #7
Frame: Fly Tierra
Fork: Sunday Morning 2
Stem: S&M Redneck XLT
Headset: FSA Impact
Bars: Fit Sky Highs
Grips: ODI Longnecks
Seat: Shadow Pivotal
Seat Post: United Stump
Seat Clamp: Fly Bikes
Cranks: Primo Hallow bites
Sprocket: Colony Official
Pedals: Odyssey PC's
Chain: KMC
Front Wheel: Oddyseey Hazard
Rear Wheel: Oddyseey Hazard
Bakes: Demolition U-Brake
Brake Lever: Odyssey Mono lever small
Brake Cable: Odyssey Linear Cable
 
E RaK

E RaK

New Member
Need help choosing parts. Here's what I got. post #8
Fork - Fit Blade Light
http://www.danscomp.com/353255.php?cat=PARTS
Stem - Odyssey Elementary V3
http://www.danscomp.com/370077.php?cat=PARTS
Bars - Odyssey Lumberjack
http://www.danscomp.com/362191.php?cat=PARTS
Seat - Kink Slimp Pivotal
http://www.danscomp.com/470166.php?cat=PARTS
Seatpost - Federal Slammed Pivotal
http://www.danscomp.com/472125.php?cat=PARTS
Sprocket - Tree Lite Spline Drive (only if you got 48 slpine cranks)
http://www.danscomp.com/458157.php?cat=PARTS
Tree Lite Chainwheel (if you dont have 48 spline cranks)
http://www.danscomp.com/458156.php?cat=PARTS
Pedals - Animal Hamolton Plastics
http://www.danscomp.com/465237.php?cat=PARTS
Chain - Shadow Interlock V2
http://www.danscomp.com/464041.php?cat=PARTS
 
L

leggomyeggow

New Member
Need help choosing parts. Here's what I got. post #9
is the DK R/T fork any good? It is 25oz which seems very light. Or is it too weak?
 
AustinK

AustinK

Well-Known Member
Need help choosing parts. Here's what I got. post #10
^ i have never seen them in person but i would avoid them for street use as it does not have a star nut. Plus you would have to buy a compression device on the side.
 

New Topics

Top