Need a fast response on this

  • Discuss Need a fast response on this in the General BMX Forum forum in area BMX-Forum Community; I need to order new cranks tonight, i'm getting profile's because my stock cranks are stripped. Do I need to buy new BB's for these cranks? or do the... ...
Tdadd

Tdadd

New Member
Need a fast response on this post #1
I need to order new cranks tonight, i'm getting profile's because my stock cranks are stripped. Do I need to buy new BB's for these cranks? or do the ones I already have work fine
 
SnK

SnK

New Member
Need a fast response on this post #2
Well what bb size is your frame? Mid/Usa/Spanish?
What size spindle is the profile? 19mm or 22mm?
What was the spindle size of your old cranks? 19mm or 22mm?
 
Elliott

Elliott

New Member
Need a fast response on this post #3
depends on wether your current bb is sealed but should be fine as most stock cranks are 19mm axle like profiles
 
Arch Enemy

Arch Enemy

New Member
Need a fast response on this post #4
If your BB now is 19MM than you should be fine
 
Tdadd

Tdadd

New Member
Need a fast response on this post #5
Well what bb size is your frame? Mid/Usa/Spanish?
What size spindle is the profile? 19mm or 22mm?
What was the spindle size of your old cranks? 19mm or 22mm?
The profile spindle is 19mm, I have no idea what my old cranks were but i'm guessing 19mm. I have a 2008 haro frame

No Idea what my bb size was.

Any of that help?
 
SnK

SnK

New Member
Need a fast response on this post #6
The profile spindle is 19mm, I have no idea what my old cranks were but i'm guessing 19mm. I have a 2008 haro frame

No Idea what my bb size was.

Any of that help?

Your current BB will work fine. Aslong as it's 19mm. Make sure you don't damage it taking it out though..
 
At1x

At1x

New Member
Need a fast response on this post #7
The profile spindle is 19mm, I have no idea what my old cranks were but i'm guessing 19mm. I have a 2008 haro frame

No Idea what my bb size was.

Any of that help?
Well if the Profile's are 19mm and your old ones were 19mm and they're were sealed, you shouldn't have a need to buy new BB
 
M

Marcus Poopy

Guest
Need a fast response on this post #8
how fast? like a fox, or like a turtle????
 
SnK

SnK

New Member
Need a fast response on this post #9
M

Marcus Poopy

Guest
Need a fast response on this post #10
Funny only gets you so far.

Doesn't help him and is off topic.

Just thought i'd let ya know.
why would i say exactly what everyone already said, he got the info he needed. why should i repeat it?
 
fit bike co

fit bike co

New Member
Need a fast response on this post #11
M

Marcus Poopy

Guest
Need a fast response on this post #12
mack_turtle

mack_turtle

New Member
Need a fast response on this post #13
if you have a haro, it probably came with unsealed 20mm cranks. if this is the case, you will need an american BB with sealed bearings to go with those 19mm profiles.

can you post a photo of that area of your bike for us to see? or take it to a bike shop so they can tell you what you need.
 

New Topics

Top