handle bar problems

  • Discuss handle bar problems in the General BMX Forum forum in area BMX-Forum Community; i got a subrosa letum dirt 08 last winter and i dont really ride hard with it, it has two piece bars and the place where the two pieces are welded... ...
K

Kasmeer

New Member
handle bar problems post #1
i got a subrosa letum dirt 08 last winter and i dont really ride hard with it, it has two piece bars and the place where the two pieces are welded together the paint is chipping off, i dont see any cracks, does this mean my bars are bent?
 
ROB THE ERT

ROB THE ERT

New Member
handle bar problems post #2
its kinda hard to bend bars down there. its just paint anyways.

if you dont like it repaint it
 
TheAzMyster

TheAzMyster

New Member
handle bar problems post #3
so is it chipping on the weld?

if it is then it was probably crappy paint or paint job
dont worry mine did that aswell but underneath if it makes any sence
 
rebelwolf007

rebelwolf007

New Member
handle bar problems post #4
where do you live in chicago
 
IB Street

IB Street

New Member
handle bar problems post #5
paint chips one bad bail could scrape your paint off, even if its glossed onto chromoly. It happened to my Kink High Bars from a friend doing a little endo on a bank.
 
K

Kasmeer

New Member
handle bar problems post #6
i live on the north west side
 

New Topics

Top