Grind box?

  • Discuss Grind box? in the General BMX Forum forum in area BMX-Forum Community; Anyone have an grind box dimensions or blue prints, looking to be able to hop on a 180 off ...
J

jellacrosse

New Member
Grind box? post #1
Anyone have an grind box dimensions or blue prints, looking to be able to hop on a 180 off
 
BMXDAN

BMXDAN

New Member
Grind box? post #2
google.com
 
Tyler Ciervo

Tyler Ciervo

New Member
Grind box? post #3
why would you need dimensions to make a rectangle. did you fail math? make it 39863984579 feet high and 239582398478 feet long. i mean come on. not to be mean or anything.


2 feet high by 6 feet long is good enough. depending on how high you can hop.
 
J

jellacrosse

New Member
Grind box? post #4
dan treacy i hate you
 
The Radness

The Radness

New Member
Grind box? post #5
i did 2.5 high by 8 feet long, 2.5 wide

It's better to practice on a taller controlled object, really helped my street riding alot
if you can do all your grinds on 2.5 tall object, most street objects will be cake

you could even go really crazy and do it 3 feet wide, split it and half, and do one side 2.5 tall and the other side a different height
 
Boney

Boney

New Member
Grind box? post #6
I ****ING LOVE DAN TRACY.i
 
J

jellacrosse

New Member
Grind box? post #7
eh yeah i guess hes an alright kid
 
Chuck Norris

Chuck Norris

New Member
Dilmah Green Tea

Dilmah Green Tea

New Member
Grind box? post #9
^^ no pics of you riding it :(

I can see why it broke... heh.
Just build a basic rectangle as its been said like 3 times now.
 
Creepozoid

Creepozoid

New Member
Grind box? post #10
Not bad, but too low and it should have had coping or a metal edge
 
A

AlexB

New Member
Grind box? post #11
2-4 feet wide
1-2 foot high - depending on your bunnyhop skillz
5-10 foot long. depending on your manual skillz.

then get a mettle sheet and stick it on the sides.

your done.
 
AmericanFear

AmericanFear

New Member
Grind box? post #12
dude you really dont need blueprints. I built a sick box when i lived in NH by going to homedepot, bought a bunch of 2x4s, plywood, and some a 90 degree metal piece (not sure what its techniclly called) to grind on.

but it should be easy to find some plans via google

2-4 feet wide
1-2 foot high - depending on your bunnyhop skillz
5-10 foot long. depending on your manual skillz.

then get a mettle sheet and stick it on the sides.

your done.
i dont really think the length has nething to do w/ your manual skills. if your not that good at manuals and you build it long that will give you room for improvement. and also more runway room for 180s off
 
T

tsi

Guest
Grind box? post #13
if you don't know just grab some pieces and measured it on you tire and peg to check the clearence
 
RossKnight

RossKnight

New Member
Grind box? post #14
..., and some a 90 degree metal piece (not sure what its techniclly called) to grind on.
angle iron? angle aluminum?

thats what i've usedd :D
 
HobosRck

HobosRck

New Member
Grind box? post #16
Here is a good site with specs to build anything your little heart desires. If you can't find it on the site then there is a forum too.
When you build it, post up pics so I can see.

EDIT...I forgot the site.....www.rampplans.org
 
Last edited:
J

jellacrosse

New Member
Grind box? post #17
alright thanks guys im building one this weekend ill take pics
 
Chuck Norris

Chuck Norris

New Member
Grind box? post #18
^^ no pics of you riding it :(

I can see why it broke... heh.
Just build a basic rectangle as its been said like 3 times now.
I had a vid, but it was crap so i deleted it haha. I bunnyhopped on it, and it broke ::oops:
 

New Topics

Top