Getting new frame...If I get a new frame will I be able to..

  • Discuss Getting new frame...If I get a new frame will I be able to.. in the BMX Bike Tech forum in area BMX-Forum Community; put on all the stuff from my GT performer onto a new frame (some flat frame dont know which yet) ...
  • Tags bike bikes
T

The Worst

New Member
Getting new frame...If I get a new frame will I be able to.. post #1
put on all the stuff from my GT performer onto a new frame (some flat frame dont know which yet)
 
M

Mr_Shrapnel

New Member
Getting new frame...If I get a new frame will I be able to.. post #2
yes you should be able to. most/all bmx parts are pretty generic sizes/shapes, and as such means that any part can be put onto any bike/frames.

however sometimes this is not the case, eg, if you had a hub with 14mm axles, but only had 10mm slots.
 
X

XIII

Guest
Getting new frame...If I get a new frame will I be able to.. post #3
or if you get a frame with a Euro BB
 
F

federal_rider12

New Member
Getting new frame...If I get a new frame will I be able to.. post #4
seat tubes are also something to take into consideration. most bikes use a 1" tube but some companies and cheaper bikes might go with somethign different, cheap bikes usually run a 7/8" and some other companies might run a 1 1/8(or 1 1/4) i cant remember which.
 
O

oibmxpunx

New Member
Getting new frame...If I get a new frame will I be able to.. post #5
u should get a sick child cuz thos things are muthaf*ckin p.i.m.p.
 

New Topics

Top