Driver

  • Discuss Driver in the BMX Bike Tech forum in area BMX-Forum Community; How do I change the cog on my odyssey driver from an odyssey hazzard hub? ...
matt1228

matt1228

New Member
Driver post #1
How do I change the cog on my odyssey driver from an odyssey hazzard hub?
 
matt1228

matt1228

New Member
Driver post #2
please help
 
M

MATRIX

Guest
Driver post #3
You need tools.

1- Chain whip(an old chain will work too) to hold the cog.
http://www.danscomp.com/811093.php?cat=TOOLS

2- Either a flathead screwdriver or something flat.

3- A rubber mallet or hammer.

Now, hold the cog with the chain whip. It will loosen going backwards(freewheel). So, hold the cog from moving FORWARD(to pedal).

Gently tap the hammer on the screwdriver going backwards(freewheel). You will see small grooves in the retainer that holds the cog. Use them to hold the screwdriver in place.

After it is loosened, it will just come off like a bolt.

Then remove the cog and put the other on. And tap the retainer back on.
 

New Topics

Top