Building something to grind on

  • Discuss Building something to grind on in the General BMX Forum forum in area BMX-Forum Community; Anyone got any ideas? There are no ledges, rails, etc around here. I don't have a welder either. Any suggestions appreciated! -Rippin ...
R

Rippin92RS

New Member
Building something to grind on post #1
Anyone got any ideas? There are no ledges, rails, etc around here. I don't have a welder either. Any suggestions appreciated!

-Rippin
 
O

oibmxpunx

New Member
Building something to grind on post #2
get 3 4 bt 4s cut 2 of them 3 foot put 1 1/2 foot in the ground and nail the other on top and wax it up
 
E

evanc

Guest
Building something to grind on post #3
Translated:

make a 2' x 2' square out of 2x4's. Make 3 of those. It should use three 2x4's. Then put a 2x4 at each corner so it's a long rectangular box with a 2'x2' square in the middle. Put 3/4" ply on top/sides, and 2" angle iron on the corners. Done. If you don't get it, read it again. And again. If you still don't get it, I'll draw you something.
 

New Topics

Top