[How-To] Drill holes & install gyro tabs

[etoy]

I wanted my odyssey gyro back on my s3 so that's what i did:

1) bought a pair of flybikes removable gyro tabs



2) made a sign on the frame with a marker



i controlled the distances first and signing the center of the tubes was ok for me

this way:


3) drilled holes with a 2.5mm drill (with the same distance of the holes on gyro tabs obviously)



4) tapped the holes with a 3Mx0.5 thread



5) screwed in the tabs



6) and voilà!




sorry for my horrible english and the low pictures quality but i'm italian and the only thing i had with me was a crap camera phone. hope that helps anyways!

[FOXBMX]

sweet! good how to

[DislikesSkaters]

Good how-to, this will probably be helpful for many people.

[jaredmi]

If you center punch the holes it will keep the drill bit from wandering, and make drilling the holes a bunch easier. You should use a punch, but a phillips screwdriver will work.

[funkrocker182]

thx so much man

[asianprideryder]

nice. so your bike didnt come with brakes in the first place?

[The Radness]

i think it either came with a straight cable or possibly a gryo plate instead of tabs?

[etoy]

nope it's a fit s3 and it did not come with holes for gyro tabs,only brake bosses and cable guides.the newer ones already come with holes

[Dylan]

Very well done how-to, rep for that, that'll help me as i'll have to have plates, i don't like plates =[

[azman]

Nice man Nice, i already have gryo tab holews tho, so no modding for me but good how to