Thread: [HowTo] Make Your Casette Louder
-
02-13-2007 #1
[HowTo] Make Your Casette Louder
OK first off, this is not recommended by most people but if you like loud casettes (like me) then this mod is for you!
OK! lets get started:
Step 1: Take your back rim off of your bike and take the nut on the driver side off.
Step 2: Take the nut off the front of the driver so that the driver will slide out of the hub shell and off the axle.
Step 3: Pull off the driver. If it has never been taken off, it might be hard to get off but just give it a few tugs and it shoudl come right out.
Step 4: Take off the spring/round clip that holds the pawls in place and make sure you dont lose them, keep them on a paper towel so you dont get things greasy like i did.
Step 5: Take the round clip and put your fingers on either side of the open end and push to were it bends it and makes the open end overlap a small bit.
Step 6: Now that you have bent it in it puts more tension on the pawls so they spring up harder and make your casette louder. Now just re-install the pawls and make sure they all are sticking up, slide the driver back on the axle and back into the hub shell, put back on the nut that holds the driver on, and stick the wheel on your bike and go ride!
Although it makes your casette louder, it may wear down the shell a bit faster but not by much, youll be fine if you do it no worries.
-VanLast edited by nutsgeezer; 03-29-2007 at 02:40 PM.
The kevin Babb Experience
-
02-13-2007 #2
no ones a fan of loud casettes eh? lol
The kevin Babb Experience
-
02-13-2007 #3360
- Join Date
- Jan 2007
- Posts
- 899
i love loud cassettes.
but i ride a freecoaster.
its kinda silent..
haha.
-
02-13-2007 #4
I like loud cassets to... but my is loud from factory
But nice "How To"
All I have in this world is my balls and my word and I break them for nobody.
Stay Strong Trimix!!!
-
02-13-2007 #5
I'd do that if i knew how to lace the spokes back up.
-
02-13-2007 #6Tailwhip
- Join Date
- Sep 2006
- Location
- USA
- Posts
- 1,548
Wow you dont need to unlace a wheel to do that.
Aim- Bmxer21225
-
02-13-2007 #7
-
02-13-2007 #8
he just prolly had it laying around as a back up
and decided to do it to it
-
02-13-2007 #9
He probably had a spare hub sitting around?
Just an educated guess.......Trails>Park>Street. I can boost kickouts and griz airs all day and be satisfied.
-
02-13-2007 #10
Oh yeah, nice remote control. I used to have one. Thing was ill until my mom got pissed and threw it at one of my brothers.....
Trails>Park>Street. I can boost kickouts and griz airs all day and be satisfied.
Similar Threads
-
[HowTo] Make A Headset Dust Cover
By FOXBMX in forum BMX Articles & Event ReportsReplies: 26Last Post: 08-19-2009, 10:19 PM -
[HowTo] make curb wax
By FOXBMX in forum BMX Articles & Event ReportsReplies: 37Last Post: 01-15-2008, 09:45 PM -
louder freewheel hub
By HaroStreet in forum BMX Bike TechReplies: 24Last Post: 03-14-2007, 05:20 PM -
[HowTo] Make Your Casette Louder
By Van in forum BMX Tech FAQReplies: 0Last Post: 02-13-2007, 01:10 AM -
[HowTo] (Video) Make A Freecoaster
By DunsterYeomans in forum BMX Articles & Event ReportsReplies: 13Last Post: 02-03-2007, 04:59 PM



Reply With Quote
