Next
06-25-2007, 06:13 PM
Hi im new and im turning a Kent ( http://www.kentbicycles.com/images/products/62026.jpg sumthing like this ) in to and old school bike here is everything that i am puttin on it im just using the frame and the crank from this bike the bikes year is prolly around '96 or '97
Paint job - red by the rear tire, then it fades to orange in the middle of the bike then into yellow at the front by the forks and handlebars
Tires - http://www.bikealot.com/images/red2125.jpg They match the bike
Rims - just ordinary 20" rims http://i3.ebayimg.com/02/i/000/a6/81/f2ad_1.JPG
now i was wondering will my tire fit my rims if my tires are 2.125 and my rims are 1.75
Pedals - there like this but thinner and yellow http://i23.ebayimg.com/03/i/000/99/a0/cf52_2.JPG
Seat - i haven't found a seat yet any suggestions would be apprecitated
Handlebars - something like this http://i4.ebayimg.com/01/i/000/a4/6a/3ddd_2.JPG
Thanks,
Brandon
Paint job - red by the rear tire, then it fades to orange in the middle of the bike then into yellow at the front by the forks and handlebars
Tires - http://www.bikealot.com/images/red2125.jpg They match the bike
Rims - just ordinary 20" rims http://i3.ebayimg.com/02/i/000/a6/81/f2ad_1.JPG
now i was wondering will my tire fit my rims if my tires are 2.125 and my rims are 1.75
Pedals - there like this but thinner and yellow http://i23.ebayimg.com/03/i/000/99/a0/cf52_2.JPG
Seat - i haven't found a seat yet any suggestions would be apprecitated
Handlebars - something like this http://i4.ebayimg.com/01/i/000/a4/6a/3ddd_2.JPG
Thanks,
Brandon
