cars?

[sam-ski]

what cars do you all drive (if you are legally allowed 2 drive) i cant wait till i can drive as soon as i ass me n my m8s r going on a bmx roadtrip over the whole of the uk!!!!! lol if you have any pics then cool! cheers sam

[lowcar100]

I'm just discovering the world of driving, I drive my dad's '03 mitsubishi eclipse that has some stuff done to it, the most high-lightable being nitrous :)

I also drive my mom's quad cab dodge. its got some stuff done, leather interior, side rails, pin striping, x-line bedliner, new hood, dual exhaust lol.

she tried to make it a luxury vehicle

[Flatline]

I love to drop the transmisson in 1st, rev up the engine, let the clutch out quick, and feather the brake. Mmmmmmmmmmm the smell of burning rubber.

[soad]

i pimp a 1978 mustang king cobra w/ a 93 HO cobra 302, with a few things done to it, like re cammed, rods, lifters, flowmasters front to back, 4.10 positrack rear end, muncie 4 speed tranny w/ hurst shifter, and a roll bar. i bought it recently so i haven't taken it to the drag strip, but the guy said elevens. the nearest strip says you got to have a roll bar to race if its faster than 12's, so ill take his word for it.

[Andrizzle]

i have a 95 civic ex, mods: DOHC b18b1 motor, LS 5 spd trans, aem cold air intake, dc sports cat back exhaust, coil overs all around with polyurethane bushings, and integra gsr wheels with yokohama 195-50 tires

[stridey]

im on my Ls and i bought a 1980 celica ra40 for $300 aus. its a piece of crap but hey it does the job.

[Beanie]

i got ****ed over and cant get my liscense till im 18, i got like 7 months to go till i can get it, so ima get my permit here soon, im 17 :x

it sucks cause i cant drive anywhere, but saves on gas and shit, im getting a car here soon, gas prices dropped ALOT i was bout to go buy a big ass gas tank from walmart for freenintynine and go fill it up at the gas station and then sell it when gas prices go up

[old_school_goose]

i pimp a 1978 mustang king cobra w/ a 93 HO cobra 302, with a few things done to it, like re cammed, rods, lifters, flowmasters front to back, 4.10 positrack rear end, muncie 4 speed tranny w/ hurst shifter, and a roll bar. i bought it recently so i haven't taken it to the drag strip, but the guy said elevens. the nearest strip says you got to have a roll bar to race if its faster than 12's, so ill take his word for it.

pics?? i know that year of mustang was stupid ugly, but with a 93 302 in it, nice!

[old_school_goose]

here's my 1990 buick skylark. not to much done to it, filter, wires, plugs. i have a 12 inch sub ready but i'm saving for an amp.

[heyhey]

i have my golf 3 vith inline 2.0 litre motor(311 horse power) it has fuor whel drive and it maked in my autosport club.it has no original details(exept body)
later i can scan fotos and let yuo see how it was making:) and there is proflex supsesion system:) weight:890 kilos

[soad]

i pimp a 1978 mustang king cobra w/ a 93 HO cobra 302, with a few things done to it, like re cammed, rods, lifters, flowmasters front to back, 4.10 positrack rear end, muncie 4 speed tranny w/ hurst shifter, and a roll bar. i bought it recently so i haven't taken it to the drag strip, but the guy said elevens. the nearest strip says you got to have a roll bar to race if its faster than 12's, so ill take his word for it.

pics?? i know that year of mustang was stupid ugly, but with a 93 302 in it, nice!

i'd already have it as my avatar, but sadly, i dont have a digital camera. well, i do, but it wont work with my pc. i have a POS from 2001 with windows ME on it. nothing ever worked. it took me 3 hours to figure out how to put songs on my mp3 player. ill try to get pics of it, ill jsut have to get my bosses digital camera.

[stolen_bikes]

go 2 da library
they have free internet.....well they do here anyway
i'll tell ya what my car is when i get pics.......just got it like 1 months ago (looks so diff now)

[stolen_bikes]

well coundn't find any photo's on m comp but i have a uc torana in original gold paint (not really...resprayed) vr/vs commo interior 2x12" subs 6x9"s 6" 3 way"s amp head unit MOTOR....202 red with holley carb 9" diff extractors shaved heads unknown bigger radiator and some rims (the ones with oval shaped bits out of them and black center bit)
yere does phat burnouts and it's fast what more could you want?

[rocket]

It's currently under construction...

[PArider]

i have a 95 civic ex, mods: DOHC b18b1 motor, LS 5 spd trans, aem cold air intake, dc sports cat back exhaust, coil overs all around with polyurethane bushings, and integra gsr wheels with yokohama 195-50 tires






GET A VTEC HEAD FOR THAT! My friend has the same motor in his integra ls, but he did a mini-me swap and put a vtec head in it. Every run it? hows it do? I think im going to get eather a hatch or a crx with a b16 vtec

[Andrizzle]

im doing a "frankenstein" swap which is a b16 dohc head with my b18 bottom, since the bore is the same it's basically a stroked b16 :D.. i'd also need the ECU for the VTEC to work. right now my car would probably do mid 14's ( i know this because i raced a kid with a 14.8 second eclipse and won by a good amount) also i'm getting obx cams, 55 shot of nitrous, skunk2 intake manifold, 65mm throttle body, and a header :D.. it runs great, and pisses my friend of so bad because he has a camaro iroc-z with a big bad v8 and here my little civic with a fart cannon smokes him. 8)

[PArider]

Yeah civics can be so sweet. Im personally more of a hatchback kind of guy and thats what im getting. Know what would be sweet... turbo h22 in a crx ahhhhhhh

[SaxMachine]

right now I have a 6th gen Civic coupe with an AEM CAI and a racing chip. I'm expecting a Koni yellow coilover kit within the month, and a engine swap after I get more experience under the hood. A K20a2 should be cheaper by then. :mrgreen:
And that turbo H22 in the rex is sweet. Tight fit, but sweet!

[PArider]

right now I have a 6th gen Civic coupe with an AEM CAI and a racing chip. I'm expecting a Koni yellow coilover kit within the month, and a engine swap after I get more experience under the hood. A K20a2 should be cheaper by then. :mrgreen:
And that turbo H22 in the rex is sweet. Tight fit, but sweet!

Is it your civic vtec? Cause then it would be sweet. When i get my hatch at atleast want a b16/b18 vtec.

[sandmriderbmx]

i get my liscence in one week
car= 01 jeep grand cherokee

[41thermal]

i pimp a 1978 mustang king cobra w/ a 93 HO cobra 302, with a few things done to it, like re cammed, rods, lifters, flowmasters front to back, 4.10 positrack rear end, muncie 4 speed tranny w/ hurst shifter, and a roll bar. i bought it recently so i haven't taken it to the drag strip, but the guy said elevens. the nearest strip says you got to have a roll bar to race if its faster than 12's, so ill take his word for it.


and how old are you dude?

[Stimpy]

1st car: a 14yr old Talbot
2nd one: a 13 yr old Peugeot 205 with 80 hp - lol
3rd automobile: a brand new Renault Clio - but it lasted only three yrs :cry:

Now: No car - too expensive, but a motorcycle (not so much cheaper but much more fun :mrgreen: ) and a new bike :D


Stimpy

[SaxMachine]

right now I have a 6th gen Civic coupe with an AEM CAI and a racing chip. I'm expecting a Koni yellow coilover kit within the month, and a engine swap after I get more experience under the hood. A K20a2 should be cheaper by then. :mrgreen:
And that turbo H22 in the rex is sweet. Tight fit, but sweet!

Is it your civic vtec? Cause then it would be sweet. When i get my hatch at atleast want a b16/b18 vtec.
Not yet. Back when I got it, all I wanted was a car with good gas mileage. After test driving all of the civics in my area, it was the best bucket around. Now that I know better, and after hanging around www.clubcivic.com I know how to turn it into one sweet machine.
B-series are definitely sweet. I hope you get that hatch soon. 8)

[PArider]

yeah man i eather want a hatch or a rex. Dude you know www.honda-tech.com ? Thats another great site for honda/acura

[soad]

i pimp a 1978 mustang king cobra w/ a 93 HO cobra 302, with a few things done to it, like re cammed, rods, lifters, flowmasters front to back, 4.10 positrack rear end, muncie 4 speed tranny w/ hurst shifter, and a roll bar. i bought it recently so i haven't taken it to the drag strip, but the guy said elevens. the nearest strip says you got to have a roll bar to race if its faster than 12's, so ill take his word for it.


and how old are you dude?


...16...a helluva lot of car for a first vehicle, huh? to think, it only cost me $2,000.00+150 in parts all of which was money i worked for all summer.

[Andrizzle]

right now I have a 6th gen Civic coupe with an AEM CAI and a racing chip. I'm expecting a Koni yellow coilover kit within the month, and a engine swap after I get more experience under the hood. A K20a2 should be cheaper by then. :mrgreen:
And that turbo H22 in the rex is sweet. Tight fit, but sweet!

dude k series is sweet.. freakin I-VTEC.. *drool* my friends 96 civic hatch will be getting a 2.4L bottom end with a 2.0 head complete with a jackson racing supercharger in the next few months.. that thing will haul some serious ass.

[old_school_goose]

It's currently under construction...


looks goood, i fixing up an 84 toyota pickup. it only has 90 000 km's, but its been rolled 3 times and been throuh 3 transmissions 8O

[dek]

my car: honda civic vtec




..

:lol:

[axeman]

i have a 1990 mk ii gti golf in white
errm a 1977 pontiac transam shell,chassis and enjine
a 1988 1.1liter ford fiesta :oops: (which im driving till march when im on the golf)

the transam is purely a project car for me to use when im a LOTolder as it has a 9.9 ltr drag engine pushing 850bhp out of it...and it needs a whole new interior gearbox ..respray...e.t.c

[Diego]

iv got a really old toyota its a little rusty an it hasnt got power steering

[41thermal]

i pimp a 1978 mustang king cobra w/ a 93 HO cobra 302, with a few things done to it, like re cammed, rods, lifters, flowmasters front to back, 4.10 positrack rear end, muncie 4 speed tranny w/ hurst shifter, and a roll bar. i bought it recently so i haven't taken it to the drag strip, but the guy said elevens. the nearest strip says you got to have a roll bar to race if its faster than 12's, so ill take his word for it.


and how old are you dude?


...16...a helluva lot of car for a first vehicle, huh? to think, it only cost me $2,000.00+150 in parts all of which was money i worked for all summer.



yer my arse mate - addmittedly i dont no that much bout american insurance, however there is no fcukin way that u can insure that

[soad]

i bought it, and my dad insures it under something called PLPD. its the gets you legal" insurance pretty much.

[SaxMachine]

yeah man i eather want a hatch or a rex. Dude you know www.honda-tech.com ? Thats another great site for honda/acura
Ho-yeah! that's where I first learned about swaps and stuff, way before K was in the Honda alphabet! :lol:

dude k series is sweet.. freakin I-VTEC.. *drool* my friends 96 civic hatch will be getting a 2.4L bottom end with a 2.0 head complete with a jackson racing supercharger in the next few months.. that thing will haul some serious ass
Man, your friend is gonna fly after he stops spinning his wheels with every gear shift. :wink: I envy him.

[41thermal]

i bought it, and my dad insures it under something called PLPD. its the gets you legal" insurance pretty much.

ah rite, kk i dnt wanna do that cos then i dnt get no claims benefit but i duno if u get that over there???

[Zombie]

my recent rig was a 86 gmc jimmy fullsize with 7in lift and 42" tires and it was painted like a cow and had got milk spray painted on it. I can't tell you how awesome it was to drive around the biggest rig in the city. but now im saving up for a 2000-2001 tahoe so i can build a burly ass system in her

[old_school_goose]

my recent rig was a 86 gmc jimmy fullsize with 7in lift and 42" tires and it was painted like a cow and had got milk spray painted on it. I can't tell you how awesome it was to drive around the biggest rig in the city. but now im saving up for a 2000-2001 tahoe so i can build a burly ass system in her

7 inch? 42'' tires? wha? how can you stop somthing that big? how was it on gas?

[Andrizzle]

that must have been really tight, did they rub. my friends 89 f-150 has 11 inches of lift ( 3'' body, 8" suspension) with 42's and they don't have much room.

[sentaafEQpovar]

here's my 1990 buick skylark. not to much done to it, filter, wires, plugs. i have a 12 inch sub ready but i'm saving for an amp.



boy you be scrapin yo shit down in oakland californiyay

scrape scrape *****

get that suction pipe and the silver tint boy

lololol i love the bay area

everywhere else, old people drive those cars

in the bay... poor people buy the luxury cars they can afford... then pimp it out.

scraper: a car with accesories that cost more than the car itself.











look up side show in urban dictionary

[soad]

i bought it, and my dad insures it under something called PLPD. its the gets you legal" insurance pretty much.

ah rite, kk i dnt wanna do that cos then i dnt get no claims benefit but i duno if u get that over there???

i dunno. im under some age thing that until i turn 21, im an "At risk" client and insurance is THROUGH THE ROOF for just about anything.

[old_school_goose]

sentaafEQpovar, i'm from canada. i bought this from a 90 year old granny, so its mint. i'm trying to keep it a little nice.

[Scottehrm]

Im only 15 with my 16th b-day in march. im pumped..

ooh yea my car is an 1997 Ford Escort LX. with 80k miles and a huge 1.9L 4 cyl. loL!!

im buyin it off my mommy lol!

[Zombie]

these are both my rigs. for anyone that was questioning clearance of the 42s from the fenders this should answer your question. this is with only 7in of lift and i cut the fenders to make em fit. the front axle was also moved forward 1.5 inches